Load only this sheet of paper in the rear tray with the open side facing you. Pull out the paper output tray and the output tray extension. Hold down the Stop button until the Alarm lamp flashes eight times, then release it immediately. The paper cleans the inside of the machine as it feeds through the machine. Jim Strangways try this: 1. Open the printer as though you were going to install new ink cartridges, letting the cartridge cradle move to the center of the printing unit. Unplug the printer so that the cartridges will remain in their position. 2 Locate the waste ink absorbers in their black.

Press and hold the reset button. The unit starts cycling through the modes; hold the button for four seconds to access (cycle through) each mode. The unit status indicator flashes the color for the current mode. In this case, the light flashes red when entering the Reset mode.
Canon Maintenance Service. Let’s be honest, you’re putting your gear to work and that wear and tear can throw things off, affecting the performance of your camera and ultimately your final images. That’s why Canon Canada offers Canon Maintenance Services.

Although software resetter Canon Pixma iP1980 or resetter canon Pixma iP1900 series not available on the internet now. Doesn’t mean there is no way to reset the printer series. My opinion canon Pixma iP 1980 is new version of Canon Pixma iP 1880 so the reset methode for canon iP 1880 can be applied to Reset Canon iP1980. I also tested using reset methode for Canon iP1700 on it’s work on several Printer Canon iP1900 series.

For permanent reset after doing the manual reset you must using software restter. Software resetter such as iPtool and general tool for canon iP 1800 can be used to reset waste ink counter on the Canon iP1980 and Canon iP1900 series. To reset Waste Ink Tank canon iP1980 or iP1900 series follow this steps:

Tips Manual Reset from Dagreyt to Reset Canon iP1980

He say have tried it to Canon Pixma IP1980 and it perfectly works without using General Tools or IPtools.

Unplug the power of your printer
press and hold the power button
Plug in the power while holding the power button
then using a pen, press the Cover detection button (this button is pressed every time you close the cover, this button tells the printer if the cover is open or not. you will need to use a pen or any object that can reach the button since you cannot close the cover while holding the power button.)
release the power button
release the cover detection button
close the cover and turn your printer on. done

Tips Reset From J-TECH to Reset Waste Ink counter in the Canon Pixma iP1900/1980 using software resetter

CANON PIXMA IP1900 is just a successor of ip1880 PARTS & MANUALS ARE THE SAME but a little bit faster than 1880 (before using this resetter you must reset your printer manually)

USE GENERAL TOOL http://www.ziddu.com/download/3063183/GeneralToolsforCanonPixmaip1880-xp.rar.html
CHANGE USB PORT change into CANON PORT
click lock release
click ip1800
click device id
clear waste ink counter by clicking MAIN & PLATEN
Check EEPROM Box
Click EEPROM Dump
Test pattern 1
Your Done…

J-TECH also say: but this is not the end of your problem. EVERYTIME YOU CLEAR WASTE INK COUNTER you have to open your printer and wash the INK PAD and let it dry it will damage any part of your computer if you will not do this. I’M USING PIXMA IP1980 for almost 10,000 pages but still SAME QUALITY

Many Thanks to J-TECH and Dagreyt for this tips and tutorial

69 Responses

Related to 'Reset Canon Pixma iP1980 or Canon iP1900 series'

How to Reset Canon Pixma iP6000 and Canon Pixma iP
Waste Ink Tank Full Reset Canon i80
Reset Canon Pixma Mp150, Mp160, Mp170, Mp180, Mp45
Canon ip100 reset instructions

How to Reset Canon Pixma MP110, MP130, MPC190, MP4

Antes de poner una recomendacion, seria buenisimo que verifiquen si es cierto y no hacer perder el tiempo, de otro modo este sitio continuara siendo inutil
CANON PIXMA IP1900 is just a successor of ip1880 PARTS & MANUALS ARE THE SAME but a little bit faster than 1880
1. USE GENERAL TOOL
http://www.ziddu.com/download/3063183/GeneralToolsforCanonPixmaip1880-xp.rar.html
2. CHANGE USB PORT change into CANON PORT
3. click lock release
4. click ip1800
5. click device id
6. clear waste ink counter by clicking MAIN & PLATEN
7. Check EEPROM Box
8. Click EEPROM Dump
9. Test pattern 1
10. Your Done…
but this is not the end of your problem
EVERYTIME YOU CLEAR WASTE INK COUNTER you have to open your printer
and wash the INK PAD and let it dry it will damage any part of your computer if you
will not do this.
I’M USING PIXMA IP1980 for almost 10,000 pages but still SAME QUALITY
trust me– it works perfectly IF YOU CAN FOLLOW—–
just read carefully and do it wisely…
EMAIL ME for any questions jhay_arr100ph@yahoo.com.ph
i mean it will damage partS of your printer if you will not clean/change your ink pad.
how to change USB port to Canon Port? Mine shows USB port only.
excellent tutorial…(tnx)it works! simply follow this steps!
how can i open my printer ip1980 for me to clean waster ink?
@Chris, you need service manual ebook/book to open yours printer. You can download the service manual in canon website
my canon pixma ip 1980 alternate blinking how can i resolve this…
@ronaldo ramos, the solution from J-tech maybe solve your problem.
@Fz Thank you for the info. I’ll check the website as soon as possible.
Thank you so much for the steps. I look forward in implementing it soon.
@FZ my printer got alternating blinking. Tried following the steps from J-Tech until click device ID only, when Im clearing waste ink the general tool is not responding. When the printer is turned off the general tool is back to normal. Need your help. 🙁
@sonric68, before tried reset methode from J-Tech you must reset manual the printer. reset manual for Canon iP1980 such as reset manual in canon iP1700. thanks
Hi from Australia ..I have a Canon Pixma ip1900..I replaced the color cartridge but I dont know how to reset the printer..at the moment an orange light is flashing..what can I dio..any assistance would be vewry appreciated…thanks
@Elly, maybe you need reset ink counter your printer
Thanx to J-TECH..my pixma ip 1980 back to normally. Reset without resetter software.
THANK YOU FOR FOLLOWING MY STEPS. I’m GLAD I help you. Thank You and Let’s share more… whatever we learn about canon printer.
follow this steps in youtube.com ..
1. click this link..
http://www.youtube.com/watch?v=7lQFl6KgexQ
2. then do JTECH’s technique…
1. USE GENERAL TOOL
http://www.ziddu.com/download/3063183/GeneralToolsforCanonPixmaip1880-xp.rar.html
2. CHANGE USB PORT change into CANON PORT
3. click lock release
4. click ip1800
5. click device id
6. clear waste ink counter by clicking MAIN & PLATEN
7. Check EEPROM Box
8. Click EEPROM Dump
9. Test pattern 1
10. Your Done…
…
good luck…100 percent working
it says “not responding” every time i clean the waste ink pad ..
ei just follow the link ( http://www.ziddu.com/download/3063183/GeneralToolsforCanonPixmaip1880-xp.rar.html) and then follow the instruction #2 to the last… trust me it will work. i just tried it.
thanks for the resetter.. my printer is now working properly..
thankssss…ok na ok….godbless you nad more power….
why it’s can’t work for ip1980? i try many time, please help
the above procedure is for the old models of IP and MP series
if this procedure doesn’t work for you. try this steps
i’ve tried it to Canon Pixma IP1980 and it perfectly works withou

Canon Ip100 Reset